Search found 110 matches
- Fri Jun 26, 2020 5:56 am
- Forum: My Project
- Topic: S38/M88 Ignition Coil-On-Plug for standalone system.
- Replies: 5
- Views: 5581
- Thu Jun 18, 2020 5:57 pm
- Forum: My Project
- Topic: S38/M88 Ignition Coil-On-Plug for standalone system.
- Replies: 5
- Views: 5581
- Wed Jun 17, 2020 6:01 am
- Forum: My Project
- Topic: S38/M88 Ignition Coil-On-Plug for standalone system.
- Replies: 5
- Views: 5581
Re: S38/M88 Ignition Coil-On-Plug for standalone system.
hi, have just read your post, very interesting, how much difference is it, also could you list the parts with brands if i choose to do this, spark must be a lot better? regards richard Hi Richard, I would like to make sure that you understand that this system will require after market standalone sy...
- Mon Jun 15, 2020 7:36 pm
- Forum: My Project
- Topic: S38/M88 Ignition Coil-On-Plug for standalone system.
- Replies: 5
- Views: 5581
S38/M88 Ignition Coil-On-Plug for standalone system.
Gents, I have completed several S38 cars with custom engine management system. COP Coil-On-Plug is a part of the engine management system. I put a nice COP package together. Functionality and Esthetics are very hi requirements of mine. No wires are hanging nor showing anywhere. As of bonus people lo...
- Thu Feb 12, 2015 5:45 am
- Forum: Suspension - Steering - Brakes
- Topic: e24 M6 Power steering pump output pressure?
- Replies: 14
- Views: 12849
Nope, non-boosted brakes for race car. Using Massive Brake's booster-delete kit I've installed a smaller tandem MC, manual bias valve in the car, and then of course larger front (6-pot, 348mm) and rear (4-pot, 328mm) setups. Hi, My colleague has Track E30 S52 swap at around 2300pounds, also have a ...
- Fri Jan 16, 2015 6:53 am
- Forum: My Project
- Topic: E24 + S85 + 6-speed
- Replies: 29
- Views: 27550
- Mon Jan 12, 2015 4:53 pm
- Forum: My Project
- Topic: E24 + S85 + 6-speed
- Replies: 29
- Views: 27550
I think Anri if he can push the engine back a little it will help no end, that with some geometry to help the front grip well it should be fine. Obvious stuff like putting the battery in the rear, and perhaps deleting the AC will help the weight balacnce for sure. Even with my car with the M88, the...
- Mon Jan 12, 2015 6:54 am
- Forum: My Project
- Topic: E24 + S85 + 6-speed
- Replies: 29
- Views: 27550
- Sat Nov 02, 2013 5:25 am
- Forum: Suspension - Steering - Brakes
- Topic: *Group Buy Upper Control Arm "SoftBall" Spherical
- Replies: 10
- Views: 6555
- Thu Oct 31, 2013 3:04 pm
- Forum: Suspension - Steering - Brakes
- Topic: *Group Buy Upper Control Arm "SoftBall" Spherical
- Replies: 10
- Views: 6555
Group Buy is now Open
Hi all,
Group Buy is ready and open.
Please reply with your forum user name and your name.
Regards
Anri
Group Buy is ready and open.
Please reply with your forum user name and your name.
Regards
Anri
- Wed Oct 30, 2013 5:05 pm
- Forum: Suspension - Steering - Brakes
- Topic: *Group Buy Upper Control Arm "SoftBall" Spherical
- Replies: 10
- Views: 6555
Funny story about these, at least the pair I had. When I had the RedShark built up by Fahey in his shop, he installed a pair of these in place of the stock units. Great pieces, and they felt great. That was right up until the passenger side part failed during the first shakedown lapping session on ...
- Tue Oct 08, 2013 3:46 am
- Forum: Suspension - Steering - Brakes
- Topic: *Group Buy Upper Control Arm "SoftBall" Spherical
- Replies: 10
- Views: 6555
Anyone tried these yet? Love to hear some feedback... Frank, I and D'arcy we are using these bushings more than 5+ years... Frank had install these back in late 80's and the cars he installed them are still going. without any shimmy... Think of the Tech. concept of these bushing. I try to give a re...
- Wed Oct 02, 2013 4:44 am
- Forum: Suspension - Steering - Brakes
- Topic: *Group Buy Upper Control Arm "SoftBall" Spherical
- Replies: 10
- Views: 6555
*Group Buy Upper Control Arm "SoftBall" Spherical
Hello Gents, For those who are interested in "SoftBall" Upper spherical bearing bushings it is worth your time to read the following : Intro. It has been 12 years since I started messing around with E24 M6’s. Recently, I added E31 ‘97 to my coupe collection. With the factory upper cont...
- Wed Aug 28, 2013 1:58 am
- Forum: Engine - Mechanical - Electrical
- Topic: E24 upgraded engine and gearbox mounts
- Replies: 4
- Views: 4781
Re: Engine mounts.
Cheers Arni this helps alot. As my e24 is not a daily driver I don't mind a little bit of rawness that the LW flywheel and upgraded gearbox mount will bring. Some rawness adds to the excitement of driving. I already have the delrin shifter bush whit a short shifter and it works a treat. Just a ques...
- Tue Aug 27, 2013 4:39 am
- Forum: Engine - Mechanical - Electrical
- Topic: E24 upgraded engine and gearbox mounts
- Replies: 4
- Views: 4781
Re: E24 upgraded engine and gearbox mounts
Hey guys not far away from installing the dogleg box and LW flywheel behind the m88. I have to install a different crossmember. Just asking whether its worth replacing and upgrading the engine and gearbox mounts. I don't mind abit if rawness and whine as I'm setting the car up more as a spirited dr...
- Thu Jun 13, 2013 4:31 am
- Forum: Engine - Mechanical - Electrical
- Topic: Need Wiring diagram, please help.
- Replies: 3
- Views: 2760
the 'wedophones' link has wiring diagrams; are these not what you want? cheers Brucey, Sorry I am a bit confused with what you are trying to direct me. I need wiring diagram not for the Diagnostic plug. The one on the Pic with the Blue tape is E34 M5, I need the second bellow. Earlier today I was s...
- Wed Jun 12, 2013 3:20 pm
- Forum: Engine - Mechanical - Electrical
- Topic: Need Wiring diagram, please help.
- Replies: 3
- Views: 2760
Need Wiring diagram, please help.
Hi all, I am attaching you a pic on the plug I need diagram for. When sold S38-B35 engine went with the wire harness. In the original BMW factory troubleshooting no were is shown diagram for the plug in the pic. I am swapping S38 B36 out E34 M5 and I have pulled the information that I need from the ...
- Fri May 17, 2013 2:44 pm
- Forum: Engine - Mechanical - Electrical
- Topic: EURO Head Lights set up question/Wiring Diagram
- Replies: 8
- Views: 4962
Hi,It did over load the system. The relay got so hot that melted complete fuse box...Lucky me the 635csi I have for parts has the same box as the 5/87 M6.Anri Exactly what I was referring to about wire size and heat, Oh, I didn't mention that I also put a 30 amp circuit breaker in between the relay...
- Fri May 17, 2013 4:50 am
- Forum: Engine - Mechanical - Electrical
- Topic: EURO Head Lights set up question/Wiring Diagram
- Replies: 8
- Views: 4962
Hi, I did wire it with the relay+fuse for save reasons, connected to the low beam metal relay and it was working fine for about a week and after it did melt my complete fuse box. :( and again lucky me the wire harness did not cough a fire... It did over load the system. The relay got so hot that mel...
- Thu May 16, 2013 3:31 pm
- Forum: Engine - Mechanical - Electrical
- Topic: EURO Head Lights set up question/Wiring Diagram
- Replies: 8
- Views: 4962
EURO Head Lights set up question/Wiring Diagram
Gents, Have question on Electrical set up for Euro cars. I want to set up the head lights on US model E24 m6 from 82 up to 6/87 to convert the head light system to Euro set up, I am already using late model Euro 89 with the day light bulb in the head light. On my "8/87" 1988 M6 the head li...
- Sat May 04, 2013 3:26 pm
- Forum: Cars and Parts for sale
- Topic: Holy Crap! E30 ///M S38 conversion
- Replies: 18
- Views: 8808
That's what you call a labour of love! And the creation of the ad. must have taken many, many hours. I am glad you realize and point this out ! I appreciate your comment of understanding what is involved in such a custom build. When I am ready with my Race car E24 M6 S38-B36 powered I will post. Re...
- Sat May 04, 2013 3:18 pm
- Forum: Cars and Parts for sale
- Topic: Holy Crap! E30 ///M S38 conversion
- Replies: 18
- Views: 8808
My car.
Hi,
Did my best to do a very clean and original factory look Swap S38-B36 with healthy 282RWHP into E30 M3.
Completely restored inside outside.
Regards
Anri
Did my best to do a very clean and original factory look Swap S38-B36 with healthy 282RWHP into E30 M3.
Completely restored inside outside.
Regards
Anri
- Sat May 04, 2013 3:04 pm
- Forum: Cars and Parts for sale
- Topic: E24 M6 S38 Water Radiator in good condition.
- Replies: 1
- Views: 1678
E24 M6 S38 Water Radiator in good condition.
Hi,
I have for sale nice and perfect operating E24M5/E28M5 S38 Water Radiator.
$99+actual shipping.
I
Anri
I have for sale nice and perfect operating E24M5/E28M5 S38 Water Radiator.
$99+actual shipping.
I
Anri
- Sun Nov 18, 2012 6:54 am
- Forum: Suspension - Steering - Brakes
- Topic: Rear suspension wobbling unstable questions/issues
- Replies: 51
- Views: 16079
Nice to meet you.
Who's Anri Hi, Anri is a person who owns total of 5 E24 M6's...E30 M3 S38-B38 swap, E30 M3 S38 B36.+ restored more than 5 E24 M6's. Sounds un real but its the reality. 1). All Dinan suspension Daily driver, 1) E24 M6 S62-B50 swap, 1) E24 M6 50k original miles 1) E24 M6 62k miles original, 1) full R...
- Sat Nov 17, 2012 3:42 pm
- Forum: Suspension - Steering - Brakes
- Topic: Rear suspension wobbling unstable questions/issues
- Replies: 51
- Views: 16079
Re: Rear suspension wobbling unstable questions/issues
When I drive my car into turns and over bumps it feels as if the rear is slipping out or something is just not tight enough and the rear end is about to slip out of the car, what could be a cause of this? Odd thing is I just had every single nut, bolt, and bushing replaced on the suspension on my 6...