transmission mounts for 85 635

Post here for mechanical and engine topics such as fuel issues, transmission problems, rough idle, exhaust, electrical issues, etc

Moderators: GRNSHRK, ron, bfons

Post Reply
alpine23
Posts: 26
Joined: Thu May 07, 2020 2:42 pm
Location: Tucson, AZ

transmission mounts for 85 635

Post by alpine23 »

I have a 1985 635csi, with the Getrag 265 manual transmission. I wanted to install some stiffer transmission mounts, but I found that I have the angled transmission mounts.

Based on this article, it seems that the E30 M3 mounts are the same size:
http://www.e30sport.net/installs/2.5_re ... y_mnt1.htm

Given that, has anyone tried installing these in their E24 with G265 transmission?
https://www.akgmotorsport.com/product/g ... thane-70a/
User avatar
Slownrusty
Posts: 617
Joined: Wed Apr 24, 2019 2:22 pm
Location: Houston, TX

Re: transmission mounts for 85 635

Post by Slownrusty »

I recommend calling Ireland Engineering, they shouldl have the mount you need.
User avatar
86_6series
Platinum Member
Platinum Member
Posts: 1069
Joined: Mon Apr 02, 2007 10:08 pm
Location: West Nyack, NY

Re: transmission mounts for 85 635

Post by 86_6series »

86-635CSi
96-MB C220 SOLD
98-740i
71-Continental MK3
alpine23
Posts: 26
Joined: Thu May 07, 2020 2:42 pm
Location: Tucson, AZ

Re: transmission mounts for 85 635

Post by alpine23 »

Thanks, but those are for Getrag 260, I have Getrag 265. The transmission has angled mounts. You can see what they look like in this diagram.

(the left side is E30 M3 mounts, right side E24 Getrag 265 mounts)

Image

I brought in garagistic mounts similar to those from IE to my mechanic and they said it would not work. They are a very reputable BMW shop, I trust what they say is correct. Also, it is plain to see that the mount will not fit correctly as is.

Anyway, I have ordered the AKG mounts (for the E30 M3 but i believe it should be compatible). Will see if it works. I'll report back here for anyone else with my situation in the future.
alpine23
Posts: 26
Joined: Thu May 07, 2020 2:42 pm
Location: Tucson, AZ

Re: transmission mounts for 85 635

Post by alpine23 »

Update: the mounts from AKG fit! The only difference is that the lower stud is 6mm vs 8mm, but given that the mount is already locked into place within the transmission crossmember, should not be an issue.
User avatar
zinnocoupe
Posts: 506
Joined: Fri Sep 19, 2014 12:57 am
Location: Vancouver BC

Re: transmission mounts for 85 635

Post by zinnocoupe »

Interesting, Thx for posting those mounts. I havent seen those
Image
Image
1979 Euro 635ci no longer a basketcase, just a running rust bucket!
1977 530i Partially restored and running now!
1987 635csi 60K KM Garage Queen
Post Reply