Finally received my Aplina Momo -4 Spoke steering wheel - from Europe. Took forever.
This steering wheel has two horn buttons - one on each of the upper spokes.
I’m using the Momo 2006 adapter- which lines up and fits correctly.
My question is how should the wires from the two horn buttons (Red wire) and (Green/Yellow wire) be wired into the Momo hub (black wire)?
Alpina Momo 4 Spoke - horn wiring
Moderators: GRNSHRK, ron, bfons
- Rick Eickhoff
- Posts: 48
- Joined: Wed Nov 07, 2018 4:48 pm
- Location: Philadelphia
Alpina Momo 4 Spoke - horn wiring
- Attachments
-
- 679D944D-40C0-4E7A-9C6A-8D43F22C96B2.jpeg (583.74 KiB) Viewed 1951 times
Rick Eickhoff
SE Pennsylvania
1988 635csi
SE Pennsylvania
1988 635csi
Re: Alpina Momo 4 Spoke - horn wiring
Have you had it re-covered or is it new?
They are ALWAYS rustier than you thought!!!!!!
'85 M #228
'87 M #367
'88 High line.
'10 X5
‘84 Alfasud 1.5 ti
'85 M #228
'87 M #367
'88 High line.
'10 X5
‘84 Alfasud 1.5 ti
- RossDinan6
- Posts: 305
- Joined: Mon Jan 29, 2007 2:35 am
- Location: SW FL, USA
Re: Alpina Momo 4 Spoke - horn wiring
The horn button grounds when depressed, energizing the horn relay. I assume the two wires go to their respective buttons, so would connect to the chassis side wire.
My '84 ETM shows 4 switches in parallel all grounding.
My '84 ETM shows 4 switches in parallel all grounding.
Ross
'84 633 Dinan turbo
'84 633 Dinan turbo
- Rick Eickhoff
- Posts: 48
- Joined: Wed Nov 07, 2018 4:48 pm
- Location: Philadelphia
Re: Alpina Momo 4 Spoke - horn wiring
Got the horn wiring figured out. Thinking about using a Momo accrentric hub spacer. The 380mm wheel is blocking the upper portion of the gauge cluster. Has anyone used one ?
- Attachments
-
- F1ECEB37-B2E9-4441-9FC9-FFA994CAE0B7.jpeg (543.39 KiB) Viewed 1900 times
Rick Eickhoff
SE Pennsylvania
1988 635csi
SE Pennsylvania
1988 635csi