Hi Guys
Have removed both front wings and Bonnet/Hud. I’m in the process of re-fitting them.
Does anyone know what the panel gap you should be around the Bonnet/Hud.
Should it be even all the way round.
Thanks.
Panel gap measurements
Moderators: GRNSHRK, ron, bfons
-
- Posts: 239
- Joined: Fri Nov 18, 2016 11:40 pm
- Location: Liverpool uk
Panel gap measurements
Ronnie
Liverpool uk.
1986 635csi.
Bronze Beige Metallic.
Liverpool uk.
1986 635csi.
Bronze Beige Metallic.
Re: Panel gap measurements
Gaps should certainly be even, especially between the bonnet sides and the wings, otherwise it will stand out horribly. But the gaps aren't especially small at around 5mm each side and as much as 6mm between wing and door panel.
Phil
__________________________
1988 Highline 635 CSi
__________________________
1988 Highline 635 CSi
-
- Posts: 239
- Joined: Fri Nov 18, 2016 11:40 pm
- Location: Liverpool uk