Panel gap measurements

Post in this forum for topics relating to the exterior. This includes body, windows, and accessories

Moderators: GRNSHRK, ron, bfons

Post Reply
Ronnie Wilson
Posts: 239
Joined: Fri Nov 18, 2016 11:40 pm
Location: Liverpool uk

Panel gap measurements

Post by Ronnie Wilson »

Hi Guys

Have removed both front wings and Bonnet/Hud. I’m in the process of re-fitting them.
Does anyone know what the panel gap you should be around the Bonnet/Hud.
Should it be even all the way round.

Thanks.
Ronnie
Liverpool uk.
1986 635csi.
Bronze Beige Metallic.
plip1953
Posts: 400
Joined: Mon Aug 13, 2018 4:15 pm
Location: Leeds

Re: Panel gap measurements

Post by plip1953 »

Gaps should certainly be even, especially between the bonnet sides and the wings, otherwise it will stand out horribly. But the gaps aren't especially small at around 5mm each side and as much as 6mm between wing and door panel.
Phil
__________________________

1988 Highline 635 CSi
Ronnie Wilson
Posts: 239
Joined: Fri Nov 18, 2016 11:40 pm
Location: Liverpool uk

Re: Panel gap measurements

Post by Ronnie Wilson »

Hi,

Thanks
Ronnie
Liverpool uk.
1986 635csi.
Bronze Beige Metallic.
Post Reply