Page 1 of 1
Miller MAF with 059ECU--SOLD
Posted: Tue Sep 29, 2020 11:40 am
by 86_6series
I needed a stand alone ecu for my 86-M30-B34 engine build so my Miller MAF, 059 refurbished ecu with
the Miller non WAR 28 pin chip is for sale. Working perfectly before rebuild.
For the whole package I'd like to get $400 shipped.
Bob V
Re: Miller MAF with 059ECU
Posted: Tue Oct 06, 2020 11:27 pm
by gug
How does the car drive with the MAF?
Re: Miller MAF with 059ECU
Posted: Thu Oct 08, 2020 12:12 am
by 86_6series
Re: Miller MAF with 059ECU
Posted: Fri Oct 09, 2020 2:11 pm
by Slownrusty
What's involved in the installation?
Re: Miller MAF with 059ECU
Posted: Sat Oct 10, 2020 12:51 pm
by 86_6series
Re: Miller MAF with 059ECU
Posted: Sat Oct 10, 2020 2:18 pm
by Jlc
86_6series wrote: ↑Tue Sep 29, 2020 11:40 am
I needed a stand alone ecu for my 86-M30-B34 engine build so my Miller MAF, 059 refurbished ecu with
the Miller non WAR 28 pin chip is for sale. Working perfectly before rebuild.
For the whole package I'd like to get $400 shipped.
Bob V
How can I tell if the ECU is compatible with my 85?
Do you also have the Miller replacement boot?
Re: Miller MAF with 059ECU
Posted: Sun Oct 11, 2020 2:33 am
by gug
Take a look at your ECU The number should end in 059.
Re: Miller MAF with 059ECU
Posted: Sun Oct 11, 2020 7:10 am
by 86_6series
You'll have to look above the glove box as Gug said to get the number of your ECU.
I didn't use a replacement boot.
The MAF replaced the AFM with no mods needed.
Re: Miller MAF with 059ECU
Posted: Mon Oct 12, 2020 9:35 pm
by Slownrusty
Thank-you for replying.
I will bow out as I do not want to cut my stock EFI harness.
Re: Miller MAF with 059ECU
Posted: Tue Oct 13, 2020 11:09 am
by 86_6series
Just so you know.
The harness only cuts the 5 volt to AFM to pick up the 12 volts for MAF.
It's totally reversible if needed.
Re: Miller MAF with 059ECU
Posted: Fri Nov 27, 2020 4:56 pm
by Rennsportguy
Still for sale? Thanks.
Bill