Hi Guys
I have a bad oil leak from my 635 coming from the Timing Tensioner Bolt.
Now I have been told once I remove the bolt I have to bleed the System to remove Air. Is this true?
I just need to take the bolt out to replace the alloy washer as that is where the leak is coming from.
Any advice would be great please.
Bad Leak From Chain Tensioner Bolt Help with Removal
Moderators: GRNSHRK, ron, bfons
Bad Leak From Chain Tensioner Bolt Help with Removal
_________________________
77 E3 3.0SI
77 E24 633CSi
78 E23 728i
79 E24 633CSi
80 E24 635CSi
82 E24 635csi Race Car Build (Schnitzer Replica) viewtopic.php?t=21792
82 E28 JPS (1 of 2 Ever Built)
85 E30 JPS
77 E3 3.0SI
77 E24 633CSi
78 E23 728i
79 E24 633CSi
80 E24 635CSi
82 E24 635csi Race Car Build (Schnitzer Replica) viewtopic.php?t=21792
82 E28 JPS (1 of 2 Ever Built)
85 E30 JPS
- Hefeweizen
- Posts: 2324
- Joined: Thu Jul 17, 2008 1:24 pm
- Location: Colorado Springs
- Contact:
- Ralph in Socal
- Platinum Member
- Posts: 2746
- Joined: Tue Apr 14, 2009 3:32 am
- Location: High Desert of SoCal
You can also wrap the bolt with teflon tape as extra preventive measure after replacing the alum washer.
Ralph
Ralph
There is a very fine line between "Hobby" and Mental Illness.
85 635csi Zinno Auto
84 528i Euro
83 635 Euro Arktik
81 528i Kastanien 5-speed
88 528e Bronzit (Granpa Car)
86 535i Auto (For Sale)
81 633 csi (retired)
85 635csi Zinno Auto
84 528i Euro
83 635 Euro Arktik
81 528i Kastanien 5-speed
88 528e Bronzit (Granpa Car)
86 535i Auto (For Sale)
81 633 csi (retired)
Thanks so much guys
_________________________
77 E3 3.0SI
77 E24 633CSi
78 E23 728i
79 E24 633CSi
80 E24 635CSi
82 E24 635csi Race Car Build (Schnitzer Replica) viewtopic.php?t=21792
82 E28 JPS (1 of 2 Ever Built)
85 E30 JPS
77 E3 3.0SI
77 E24 633CSi
78 E23 728i
79 E24 633CSi
80 E24 635CSi
82 E24 635csi Race Car Build (Schnitzer Replica) viewtopic.php?t=21792
82 E28 JPS (1 of 2 Ever Built)
85 E30 JPS