FS: Engine Oil Cooler Setup

Post in this forum for cars and/or parts for sale.

Moderators: GRNSHRK, ron, bfons

Post Reply
User avatar
BCMac
Posts: 50
Joined: Fri Apr 12, 2013 6:49 am
Location: Bellingham, WA

FS: Engine Oil Cooler Setup

Post by BCMac »

I have an aftermarket engine oil cooler setup in good used condition. I just removed it from my 1982 633csi, as it is not needed in the coastal Pacific Northwest. Remote oil filter mount accepts a common spin-on filter. Comes with everything needed for installation. The cooler itself was manufacted by Earl's, but am not sure of the provinance of the rest of the pieces, or where it was originally sold. I did have to use a sawsall to coax a stuck bolt to yield, though the blade marred the rear of the filter mount. It wont be seen once mounted to the car.

See the attached pics and feel free to contact me with questions. $200obo Buyer pays shipping. Thanks!
Attachments
IMG_1668.jpg
IMG_1668.jpg (496.52 KiB) Viewed 2114 times
IMG_1670.jpg
IMG_1670.jpg (474.01 KiB) Viewed 2114 times
IMG_1666.jpg
IMG_1666.jpg (354.78 KiB) Viewed 2114 times
IMG_1667.jpg
IMG_1667.jpg (523.05 KiB) Viewed 2114 times
BC MacGregor

'82 633csi US
'84 M635 euro (Sold)
'83 635 euro (Sold)
User avatar
tschultz
Posts: 2515
Joined: Wed Jul 07, 2010 10:54 pm
Location: Colorado
Contact:

Post by tschultz »

Have any photos of it installed?
http://www.Drive4Corners.com
Image
'79 635CSi Revival
'80 635CSi
'83 633CSi Callaway Turbo continued as 1988 535is Turbo
SOLD: '81 635CSi/A
User avatar
BCMac
Posts: 50
Joined: Fri Apr 12, 2013 6:49 am
Location: Bellingham, WA

Post by BCMac »

Here it is on the 633 just before it was removed.
Attachments
IMG_1662.jpg
IMG_1662.jpg (561.9 KiB) Viewed 2009 times
BC MacGregor

'82 633csi US
'84 M635 euro (Sold)
'83 635 euro (Sold)
Post Reply