bigcoupe.com

Thank you for posting, this will be a great resource.
This should also be listed in the TECH Section as well.
Roger

The glass may need to be adjusted. Does the glass fit into the body weather striping? Does the body weather stripping push on the glass. I recall a write up on the subject of adjusting the door glass alignment, in/out direction. I'll try to locate it.

Song, look into "life time alignment". Well worth it, I purchase the "life time" when I first got the car 2014 and used the service 4 or 5 times, just to make sure the alignment was correct. Roger

Is there a reason the article can't be left in this section and also be placed in the Tech section? Copy and Paste??

What was the total amount of 134a added for front & rear A/C for proper operation?

I use Leatherique Dye with great results. MY car's interior was "Nutria" I swapped out the seats with Havana Brown Water Buffalo seats and adding rear head rest. I reconditioned and redyed the seats with Leatherique products. Regarding the speakers, I prep per mfg recommendations and appli...

Song, you want to reconsider and replace all the components at one time. You'll need a wheel alignment. Bottom line, you'll have a better ride, save time and save a little money in the long run. Roger

Mopar has one listed on FB under:
Bmw E 24 for sale and parts - Facebookhttps://m.facebook.com › Facebook Groups

https://m.facebook.com/groups/409805582364465/
https://mtouch.facebook.com/moparone.mopar

Mo, do a "Pinstripe"search in the Tech Section for additional info. I order a set, different color 51141933376, from a BMW Dlr it was shipped from Germany. Roger

Hi Song, I purchased BMW part 32732325866 and used it to replace the throttle cable rubber gattor (accordion boot) in my 1989 635, it appears it would work for your trans cable in question. Let us know the outcome. Roger

Yes it's repairable. Do a search in the Tech section (antenna repair) several helpful posts. Roger

There was a E24 in the video? I'll have to watch it again!

Colin, the red screw driver is correct for your car, it will be a journey for you to located the missing red one. Do a search on this forum for additional information on any topic, great info available.

This photo was posted by one of the forums major contributors "Brucey". It's of a 1987 tool kit. Roger

You'll need to post the year of your car and which engine, as tool kits were fitted based on year and model.

Hi Rob, as we all know there's lots of challenges with these classics. I purchase part number 11531284598, the last seven digits are the same as you indicated is on the hose you removed from your car. I'm hopeful the following photos will provide conclusive information. My photo shows the suffix of ...

I've added the additional brake lights. A universal bulb socket did not work out well for me. I proceeded to order BMW rear tail brake sockets from Ralph, with a little work they're in and looks as it came from the BMW factory as OE. Roger

Song, IMO $50 well worth it, I had mine and was charge $75. I haven't been able to reassemble the seats as I can't locate my notes as to the sequence of the washers to mount the back to the bottom. If you have photos or the sequence of that area please post.
Thanks, Roger

Hi Song, as usual you did a great job with well documentation. Please post were you purchased the "red polyurethane bushings". Roger

I would like the complete drivers side door lock complete with associated parts.
Thanks, Roger

See my post on page 7. Great product to complete the respray. Roger

Hi, I have a friend in the Charleston area who inherited a 1988 BMW, won't start. Needs a reliable shop in the Charleston area to have it towed, diagnosed and repaired.
Any suggestions????
Thanks, Roger

Very nice, nice touch for the hand strap. My interior is still a work in progress. Photo of buffalo leather rear seats, Havanna Brown.

From the numerous photos I've looked at I've noticed many of our cars have the throttle cable rubber gattor missing or damaged. I purchased BMW part 32732325866. The part is not listed as compatible with the M30 engine, however, it worked perfectly. I hope this assists other enthusiasts. The details...

Hi Mike, your response jogged my memory, the photo I posted is from a 11/86 built 635. I replaced my 89 cover (center hole only) with it as it was falling.