How to refinish this type of bench top...

Basic needs related to restoring a 6er including
Electronics, Bodywork, Welding, Painting, Engine Swap, etc
Post Reply
GRNSHRK
Platinum Member
Platinum Member
Posts: 3710
Joined: Thu Apr 08, 2004 3:24 pm
Location: Gilroy (SF Bay Area) CA

How to refinish this type of bench top...

Post by GRNSHRK »

OK gents, this thing is bugging the crap outa me :twisted:

I'm sure I can just take all of the shit off, sand it and coat it with something [-o<

Any advice on doing something like this would be more than welcome :-k

TIA, as always =D>
Attachments
IMG_4217.JPG
IMG_4217.JPG (1.66 MiB) Viewed 5549 times
IMG_4218.JPG
IMG_4218.JPG (1.29 MiB) Viewed 5549 times
:mrgreen:
Bobbo
1980 633 CSi Cypress Green/Pearl Beige
2017 X5 M Sport Xdrive 35i Carbon Black/Ivory White
2005 330 Ci ZHP Cabrio Imola Red/Bone/Black
Image
Jlc
Posts: 287
Joined: Sun Sep 27, 2020 5:27 pm
Location: Atl

Re: How to refinish this type of bench top...

Post by Jlc »

What is the top material?
85 635CSi Bronzit
GRNSHRK
Platinum Member
Platinum Member
Posts: 3710
Joined: Thu Apr 08, 2004 3:24 pm
Location: Gilroy (SF Bay Area) CA

Re: How to refinish this type of bench top...

Post by GRNSHRK »

Well, that's why I posted a pic of the layers from a corner, really not sure what it is :-?

Appears to be some sort of composite, but it's coming apart and I'm really tired of it, but don't want to have to replace it either [-X

I do think that it could be sanded, then coated, but with what, is the question :-k
:mrgreen:
Bobbo
1980 633 CSi Cypress Green/Pearl Beige
2017 X5 M Sport Xdrive 35i Carbon Black/Ivory White
2005 330 Ci ZHP Cabrio Imola Red/Bone/Black
Image
Jlc
Posts: 287
Joined: Sun Sep 27, 2020 5:27 pm
Location: Atl

Re: How to refinish this type of bench top...

Post by Jlc »

My experience is composite is tough to sand. If you don't beat on it a colored epoxy may be the best bet. You cound rough it up a bit, build a dam and pour it on.
85 635CSi Bronzit
GRNSHRK
Platinum Member
Platinum Member
Posts: 3710
Joined: Thu Apr 08, 2004 3:24 pm
Location: Gilroy (SF Bay Area) CA

Re: How to refinish this type of bench top...

Post by GRNSHRK »

Interesting idea, but that would be quite a bit of epoxy, as this bench is 3' x 6' :-k

Since it's fairly F'ed up already, think I'll try sanding a corner and see how it comes out [-o<

If I can get a smooth finish, think I'll go with polyurethane, I've had good success with the brush on stuff :-"
:mrgreen:
Bobbo
1980 633 CSi Cypress Green/Pearl Beige
2017 X5 M Sport Xdrive 35i Carbon Black/Ivory White
2005 330 Ci ZHP Cabrio Imola Red/Bone/Black
Image
User avatar
hornhospital
Platinum Member
Platinum Member
Posts: 2931
Joined: Sun Jul 11, 2010 6:46 pm
Location: Silverhill, AL
Contact:

Re: How to refinish this type of bench top...

Post by hornhospital »

If it's going to see heavy use (like it appears to have in the past), use bar top epoxy.
Ken Kanne
'84 633CSi "Sylvia"; '85 635CSi "Katja";'85 325e "Hazel Ann"; '95 M3 "Ashlyn"
User avatar
jps635
Platinum Member
Platinum Member
Posts: 872
Joined: Sat Feb 27, 2010 10:50 pm
Location: NZ

Re: How to refinish this type of bench top...

Post by jps635 »

It looks like what we commonly call 'chip-board" or "particle board".

What to depends on what you use it for, and what you want to spend. Like others have said an epoxy, but not very forgiving. Can protect the edge by screwing on an aluminium flat bar and filling in the corner/ radius wth bog or a self levelling epoxy. Good idea for the main work area is a thick industrial vinyl self-healing cutting pad, or piece of heavy vinyl, throw away and replace when done.

My benchtop is an old solid core security door (free). Heavy and solid.
'85 635csi JPS (RA2-66)
User avatar
86_6series
Platinum Member
Platinum Member
Posts: 1069
Joined: Mon Apr 02, 2007 10:08 pm
Location: West Nyack, NY

Re: How to refinish this type of bench top...

Post by 86_6series »

I would cover the top with wood, plywood or 1x8's. New smooth surface can be epoxy painted for durability.
86-635CSi
96-MB C220 SOLD
98-740i
71-Continental MK3
User avatar
86_6series
Platinum Member
Platinum Member
Posts: 1069
Joined: Mon Apr 02, 2007 10:08 pm
Location: West Nyack, NY

Re: How to refinish this type of bench top...

Post by 86_6series »

I would cover the top with wood, plywood or 1x8's or any product as a veneer.
New smooth surface can be epoxy painted for durability.
Or replace top entirely with new material.
86-635CSi
96-MB C220 SOLD
98-740i
71-Continental MK3
bpoliakoff
Platinum Member
Platinum Member
Posts: 3312
Joined: Thu Sep 28, 2006 9:28 pm
Location: scottsdale, arizona
Contact:

Re: How to refinish this type of bench top...

Post by bpoliakoff »

Top of my bench is birch veneer plywood with a 2'X2' 20 gauge metal plate in the middle wrapping around the front edge. That takes the abuse while the rest stays nice. Recovering the top is a lot more productive then trying to refinish particle board. I finished the top with urethane sprayed on.
81 Euro 635 M90 with motronic. Currently under a complete nut and bolt restoration. Pictures at
flickr.com/photos/bertsphotos.
User avatar
635sharknose
Posts: 513
Joined: Fri Sep 13, 2019 4:58 pm
Location: The Netherlands
Contact:

Re: How to refinish this type of bench top...

Post by 635sharknose »

Here in Europe we often place a metal plate on top as a finish. Usually the sheet metal sheet is bent at the front to cover the front wooden edge as well. And a small ledge in the back where it is pushed against the wall.
When damaged, just grind it smooth and it's like new again.

Image
Paul
Image
Instagram: @635sharknose
1987 635CSi Bronzitbeige
GRNSHRK
Platinum Member
Platinum Member
Posts: 3710
Joined: Thu Apr 08, 2004 3:24 pm
Location: Gilroy (SF Bay Area) CA

Re: How to refinish this type of bench top...

Post by GRNSHRK »

Well, haven't done anything yet, but did want to share the results of my other workbench, that I did refinish \:D/

The P/O kept adding sheets of MDF as they got F'ed up, so I yanked all of that off, got a piece of finished wood shelving, stained it and then coated it with polyurethane =D>

But the finish came out so nice that I don't do any heavy work on it, as it looks more like furniture than a workbench :roll:

You guys have given me some good ideas, that metal cover plate is a bit over the top, but still leaning towards sanding and coating with an epoxy finish [-o<

I'll be sure and post my results :wink:
Attachments
IMG_0278.JPG
IMG_0278.JPG (335.89 KiB) Viewed 5379 times
IMG_0279.JPG
IMG_0279.JPG (690.68 KiB) Viewed 5379 times
:mrgreen:
Bobbo
1980 633 CSi Cypress Green/Pearl Beige
2017 X5 M Sport Xdrive 35i Carbon Black/Ivory White
2005 330 Ci ZHP Cabrio Imola Red/Bone/Black
Image
User avatar
sansouci
Platinum Member
Platinum Member
Posts: 1850
Joined: Mon Jul 08, 2013 10:52 pm
Location: Southampton NY

Re: How to refinish this type of bench top...

Post by sansouci »

I would go with Formica or its equivalent. Will not absorb oil and is scuff resistant, but not scuff proof. A sheet of it, contact cement and a router edge trimmer. Many places sell laminated countertops with readymade edges and backsplashes that can be a workbench.
Sansouci
84 E24 633Csi Auto, Bronzit/PearlBeige 6997510
93 E32 740il M60 Auto, Alpenweis/Ultramarine
60 528i M30 5-speed Green/Beige (crushed)
71 240Z 4-speed White/Blue (rusty & sold)
65 396 Chevelle 4-speed, Marina Blue/Black (stolen)
GRNSHRK
Platinum Member
Platinum Member
Posts: 3710
Joined: Thu Apr 08, 2004 3:24 pm
Location: Gilroy (SF Bay Area) CA

Re: How to refinish this type of bench top...

Post by GRNSHRK »

Finally coming back to this project, as recently completed refinishing this workbench =D>

I also took the opportunity to add a couple of features, including 2X AC power outlets, more lighting and an Akro-Bin rack complete with a dozen bins for handy access \:D/

After cleaning off the bench, removing the riser and getting it up on dollies so that I could roll it around, I rolled it outside to commence with the sanding process, which didn't go as planned, as the original coating was harder than I thought :-?

So I opted for a stripper (no, not that kind :roll: ) a gel type that needed to soak in and required a scraper to remove :-({|=

That worked fairly well and I was then able to a much better job at sanding, although there were still stains and gouges that weren't going to be removed :x

I used a product called polycrylic, 2 coats each followed by more sanding, to get the surface as smooth as possible [-o<

The final coat is clear satin polyurethane, as I wanted it a bit shinier O:)

Now it's time to mess it up again #-o
Attachments
IMG_0849.jpg
IMG_0849.jpg (735.9 KiB) Viewed 1866 times
IMG_0852.jpg
IMG_0852.jpg (970.51 KiB) Viewed 1866 times
IMG_0850.jpg
IMG_0850.jpg (561.87 KiB) Viewed 1866 times
IMG_0851.jpg
IMG_0851.jpg (704.98 KiB) Viewed 1866 times
:mrgreen:
Bobbo
1980 633 CSi Cypress Green/Pearl Beige
2017 X5 M Sport Xdrive 35i Carbon Black/Ivory White
2005 330 Ci ZHP Cabrio Imola Red/Bone/Black
Image
GRNSHRK
Platinum Member
Platinum Member
Posts: 3710
Joined: Thu Apr 08, 2004 3:24 pm
Location: Gilroy (SF Bay Area) CA

Re: How to refinish this type of bench top...

Post by GRNSHRK »

Finished pix :wink:
Attachments
IMG_0853.jpg
IMG_0853.jpg (770.9 KiB) Viewed 1866 times
IMG_0854.jpg
IMG_0854.jpg (629.69 KiB) Viewed 1866 times
:mrgreen:
Bobbo
1980 633 CSi Cypress Green/Pearl Beige
2017 X5 M Sport Xdrive 35i Carbon Black/Ivory White
2005 330 Ci ZHP Cabrio Imola Red/Bone/Black
Image
User avatar
Sbeaud
Posts: 279
Joined: Fri Jan 04, 2019 9:38 pm
Location: Okahumpka, Florida USA

Re: How to refinish this type of bench top...

Post by Sbeaud »

Very nice!
1988 M6
User avatar
RossDinan6
Posts: 295
Joined: Mon Jan 29, 2007 2:35 am
Location: SW FL, USA

Re: How to refinish this type of bench top...

Post by RossDinan6 »

That looks pretty good, especially for what appears to be a particle board based bench top.

I bought a steel bench for my garage 12-14 years ago. I opted for the more expensive butcher block top a riser shelf and a couple drawers. The bench legs and riser front have provisions for outlets that I wired. Added LED strip lights under the riser. The butcher block bench top is quite tough. I do try to protect it where I can. No use as a cutting board. The Jeep tranny rebuild on it was done with a buffer in between. While I do not remember (or put out of my mind) the price difference between the two tops I am happy I opted for the butcher block.

YMMV.
Ross
'84 633 Dinan turbo
GRNSHRK
Platinum Member
Platinum Member
Posts: 3710
Joined: Thu Apr 08, 2004 3:24 pm
Location: Gilroy (SF Bay Area) CA

Re: How to refinish this type of bench top...

Post by GRNSHRK »

Thanks gents :wink:

This bench top was already existing, and it will likely get more abuse, no projects currently lined up but something will come up sooner than later :roll:

The lighting I added was also LED, kitchen under cabinet type, in addition to the fluorescent one I installed years ago :-"

But it is nice to have those 2X additional outlets wired now \:D/
:mrgreen:
Bobbo
1980 633 CSi Cypress Green/Pearl Beige
2017 X5 M Sport Xdrive 35i Carbon Black/Ivory White
2005 330 Ci ZHP Cabrio Imola Red/Bone/Black
Image
bpoliakoff
Platinum Member
Platinum Member
Posts: 3312
Joined: Thu Sep 28, 2006 9:28 pm
Location: scottsdale, arizona
Contact:

Re: How to refinish this type of bench top...

Post by bpoliakoff »

I used particle board as a base and then put, cabinet grade, birch veneer plywood over it with a 3' metal plate in the middle wrapping the edges
81 Euro 635 M90 with motronic. Currently under a complete nut and bolt restoration. Pictures at
flickr.com/photos/bertsphotos.
Post Reply