Bonnet Allignment
Moderators: GRNSHRK, ron, bfons
Bonnet Allignment
Can anyone tell me how to adjust the bonnet on a 635csi high line, have got the car recently resprayed from a body shop and now the bonnet is out of line. There doesn’t seem to be any adjustment for it to go right and left other than the 6 screws that attach to the bonnet.
-
- Bigcoupe Contributor
- Posts: 323
- Joined: Wed Sep 10, 2014 12:08 am
- Location: Arden, NC 28704
Re: Bonnet Allignment
I can't help with the alignment. I just received my car back after a respray, Bonnet is aligned, however, the bonnet bump stops were not installed which prevent the bonnet from hitting the car.
89 635CSiA (11/88 build)
AlpineWeiss II (218)/Natur(0200)
87 L6 635CSI Sold
87 MB 560SL Sold
AlpineWeiss II (218)/Natur(0200)
87 L6 635CSI Sold
87 MB 560SL Sold
Re: Bonnet Allignment
Have you tried loosening the bolts slightly and carefully nudging the hood in the direction you need? IIRC that's how I did it on my e30 years ago.
85 635CSi Bronzit
- 635sharknose
- Posts: 513
- Joined: Fri Sep 13, 2019 4:58 pm
- Location: The Netherlands
- Contact:
Re: Bonnet Allignment
There are another 6 bolts (3 per side) behind the head lights, which make it possible to move the bonnet up- and downwards.
Paul
Instagram: @635sharknose
1987 635CSi Bronzitbeige
Instagram: @635sharknose
1987 635CSi Bronzitbeige
Re: Bonnet Allignment
I need the bonnet to go to the right about 2mm, up & down height allignment is perfect.
- Attachments
-
- Bonnet
- 3279F2D1-191D-494C-95DC-BA8BFB8EEB43.jpeg (133.63 KiB) Viewed 3506 times
-
- Posts: 239
- Joined: Fri Nov 18, 2016 11:40 pm
- Location: Liverpool uk
Re: Bonnet Allignment
Hi
I have the same issue, I need to move my Bonnet around 2mm to the right.
I have removed my headlight’s to try and see if it will move a little.
I’ll let you know if I can do it.
I have the same issue, I need to move my Bonnet around 2mm to the right.
I have removed my headlight’s to try and see if it will move a little.
I’ll let you know if I can do it.
Ronnie
Liverpool uk.
1986 635csi.
Bronze Beige Metallic.
Liverpool uk.
1986 635csi.
Bronze Beige Metallic.
- 86_6series
- Platinum Member
- Posts: 1069
- Joined: Mon Apr 02, 2007 10:08 pm
- Location: West Nyack, NY
Re: Bonnet Allignment
I've seen my body shop friend grab the hood or trunk lid and give it a little
shove or a slight twist in the direction to create even gaps.
shove or a slight twist in the direction to create even gaps.
86-635CSi
96-MB C220 SOLD
98-740i
71-Continental MK3
96-MB C220 SOLD
98-740i
71-Continental MK3
Re: Bonnet Allignment
Years ago I visited Ford's Rouge River plant with my dad. Besides seeing whitebody Mustangs getting ready to ship to Shelby I watched them assemble cars and if a door didn't fit quite right whack it with a rubber mallet...86_6series wrote: ↑Fri Jun 11, 2021 11:55 am I've seen my body shop friend grab the hood or trunk lid and give it a little
shove or a slight twist in the direction to create even gaps.
85 635CSi Bronzit
- 86_6series
- Platinum Member
- Posts: 1069
- Joined: Mon Apr 02, 2007 10:08 pm
- Location: West Nyack, NY
Re: Bonnet Allignment
Just a note of caution, it's the struts that stops the hood from
touching the header. The bumpers are there to soften
the stopping of the hood. Correct strut size is vitally
important.
touching the header. The bumpers are there to soften
the stopping of the hood. Correct strut size is vitally
important.
86-635CSi
96-MB C220 SOLD
98-740i
71-Continental MK3
96-MB C220 SOLD
98-740i
71-Continental MK3
-
- Platinum Member
- Posts: 4492
- Joined: Tue Mar 16, 2010 8:32 pm
- Location: usually in the barn, Kent, England.
Re: Bonnet Allignment
You should be able to get that movement if you loosen the three bolts on each hinge which attach to the bonnet. Keep two on each side loose and just nip up the third until you've got it right - then tighten them all down. You may want to put a towel or suchlike under each front corner whilst you're moving the bonnet to avoid chipping the paint
-
- Posts: 239
- Joined: Fri Nov 18, 2016 11:40 pm
- Location: Liverpool uk
Re: Bonnet Allignment
Hi
After removing the headlight assembly you can get to the bottom of the bonnet/ hood hinge and move it only about 0.5mm, which isn’t a lot but makes a big difference because the bonnet/hood is quit long.
You can also raise or lower it from this point.
Good look.
After removing the headlight assembly you can get to the bottom of the bonnet/ hood hinge and move it only about 0.5mm, which isn’t a lot but makes a big difference because the bonnet/hood is quit long.
You can also raise or lower it from this point.
Good look.
Ronnie
Liverpool uk.
1986 635csi.
Bronze Beige Metallic.
Liverpool uk.
1986 635csi.
Bronze Beige Metallic.