Trunk lock

Post in this forum for topics relating to the exterior. This includes body, windows, and accessories

Moderators: GRNSHRK, ron, bfons

Post Reply
1206hpshark
Posts: 7
Joined: Wed Dec 11, 2019 2:24 pm
Location: Zuid Holland

Trunk lock

Post by 1206hpshark »

Hi everyone.

I have a question about removing my trunk lock.
It is locked because I lost the key.
I already replaced all the other locks.
Now I want to drill out the lock.
I had the idea to drill out the lock from the outside with a big drill into the screw attachment.
Will it work to pull the lock after its drilled out?


Picture of the idea i have for drilling it out
https://ibb.co/Yyf9TKc
User avatar
Hefeweizen
Posts: 2324
Joined: Thu Jul 17, 2008 1:24 pm
Location: Colorado Springs
Contact:

Re: Trunk lock

Post by Hefeweizen »

Yes! This is exactly what you want to do! Been there and done that. See bottom of this page http://house-calls.us/RickBMW633.html
Rainer
03 330Xi (DD)
85 635CSi (RIP 3 May 19)
80 633CSi (Red Euro, Project)

"If you think a good European mechanic is expensive, try a bad one!"
1206hpshark
Posts: 7
Joined: Wed Dec 11, 2019 2:24 pm
Location: Zuid Holland

Re: Trunk lock

Post by 1206hpshark »

awesome.
Then that is what I will do.
Thanks for the reply. =D>
Post Reply