Hi everyone.
I have a question about removing my trunk lock.
It is locked because I lost the key.
I already replaced all the other locks.
Now I want to drill out the lock.
I had the idea to drill out the lock from the outside with a big drill into the screw attachment.
Will it work to pull the lock after its drilled out?
Picture of the idea i have for drilling it out
https://ibb.co/Yyf9TKc
Trunk lock
Moderators: GRNSHRK, ron, bfons
- Hefeweizen
- Posts: 2324
- Joined: Thu Jul 17, 2008 1:24 pm
- Location: Colorado Springs
- Contact:
Re: Trunk lock
Yes! This is exactly what you want to do! Been there and done that. See bottom of this page http://house-calls.us/RickBMW633.html
Rainer
03 330Xi (DD)
85 635CSi (RIP 3 May 19)
80 633CSi (Red Euro, Project)
"If you think a good European mechanic is expensive, try a bad one!"
03 330Xi (DD)
85 635CSi (RIP 3 May 19)
80 633CSi (Red Euro, Project)
"If you think a good European mechanic is expensive, try a bad one!"
-
- Posts: 7
- Joined: Wed Dec 11, 2019 2:24 pm
- Location: Zuid Holland
Re: Trunk lock
awesome.
Then that is what I will do.
Thanks for the reply.
Then that is what I will do.
Thanks for the reply.