Hey Everyone,
I plan on getting the front valance installed soon at a professional shop. Is there any extra hardware that I need to purchase or will most professional shops have everything needed for this installation? Thanks!
Just received my M6 Front Valance from DTMFirberwerkz
Moderators: GRNSHRK, ron, bfons
Just received my M6 Front Valance from DTMFirberwerkz
My Current Fleet:
1983 633CSI
2003 330XI
2016 528i
2021 X5
Check out My YouTube Channel
https://www.youtube.com/channel/UCHtB_4 ... w2-B7BmP3g
1983 633CSI
2003 330XI
2016 528i
2021 X5
Check out My YouTube Channel
https://www.youtube.com/channel/UCHtB_4 ... w2-B7BmP3g
Re: Just received my M6 Front Valance from DTMFirberwerkz
I am SUPER interested to see how it looks when finished. My M6 air dam is all beat up, and finding a replacement that looks worse than mine is upwards of $1000. If you end up with a good result, that might be the way to go for me, and then I can take my time restoring my original piece.
There are three large brackets for mounting the stock air dam.
https://www.realoem.com/bmw/enUS/showpa ... Id=51_0510
However, I would expect any reputable shop can fabricate mounts as needed.
Jose
There are three large brackets for mounting the stock air dam.
https://www.realoem.com/bmw/enUS/showpa ... Id=51_0510
However, I would expect any reputable shop can fabricate mounts as needed.
Jose
1987 M6 - My dream car
- 635sharknose
- Posts: 513
- Joined: Fri Sep 13, 2019 4:58 pm
- Location: The Netherlands
- Contact:
Re: Just received my M6 Front Valance from DTMFirberwerkz
That looks quite good! Didn't know they were making these.
Can't this company advise in how to install it?
Can't this company advise in how to install it?
Paul
Instagram: @635sharknose
1987 635CSi Bronzitbeige
Instagram: @635sharknose
1987 635CSi Bronzitbeige
Re: Just received my M6 Front Valance from DTMFirberwerkz
Thanks for the link. I will definitely keep you posted. I'll be documenting my journey on this site and my youtube page. The link is below. From what I've heard, these DTM lower valances are legit. Some folks from Bimmerforums had posted their information. They are on Facebook too. I paid about $560 for mine. Shipping from California to Alabama by Freight was about $165.Da_Hose wrote: ↑Sat Jan 23, 2021 9:37 pm I am SUPER interested to see how it looks when finished. My M6 air dam is all beat up, and finding a replacement that looks worse than mine is upwards of $1000. If you end up with a good result, that might be the way to go for me, and then I can take my time restoring my original piece.
There are three large brackets for mounting the stock air dam.
https://www.realoem.com/bmw/enUS/showpa ... Id=51_0510
However, I would expect any reputable shop can fabricate mounts as needed.
Jose
My Current Fleet:
1983 633CSI
2003 330XI
2016 528i
2021 X5
Check out My YouTube Channel
https://www.youtube.com/channel/UCHtB_4 ... w2-B7BmP3g
1983 633CSI
2003 330XI
2016 528i
2021 X5
Check out My YouTube Channel
https://www.youtube.com/channel/UCHtB_4 ... w2-B7BmP3g