Complete tool kit SOLD

Post in this forum for cars and/or parts for sale.

Moderators: GRNSHRK, ron, bfons

Post Reply
bpoliakoff
Platinum Member
Platinum Member
Posts: 3312
Joined: Thu Sep 28, 2006 9:28 pm
Location: scottsdale, arizona
Contact:

Complete tool kit SOLD

Post by bpoliakoff »

This is a good one.
Greens.jpg
Greens.jpg (79.58 KiB) Viewed 8509 times
Very very clean and complete kit. Everything there. Original green screwdrivers, not the replacements, hard to find plastic window emergency tool, and a new blue cloth. The small screwdriver has a new blade and the cloth is new. $325 plus shipping
Last edited by bpoliakoff on Thu Apr 09, 2020 5:45 pm, edited 1 time in total.
81 Euro 635 M90 with motronic. Currently under a complete nut and bolt restoration. Pictures at
flickr.com/photos/bertsphotos.
ron
Platinum Member
Platinum Member
Posts: 4569
Joined: Sat Jul 10, 2004 11:35 am
Location: South Wales U.K.

Re: Complete tool kit

Post by ron »

What year car is it from Bert? It looks nothing like the kits I have.

The shape is right but most tools are in different places to mine!
They are ALWAYS rustier than you thought!!!!!!
'85 M #228
'87 M #367
'88 High line.
'10 X5
‘84 Alfasud 1.5 ti
bpoliakoff
Platinum Member
Platinum Member
Posts: 3312
Joined: Thu Sep 28, 2006 9:28 pm
Location: scottsdale, arizona
Contact:

Re: Complete tool kit

Post by bpoliakoff »

Ron, I have at least 15 trays in my garage so I can't tell you what year the tray is from, I have trays where all of the wrench locations are slotted which could be what you are thinking of and I just happened to grab this one. I have other trays like this that have no proviso for the Z shaped sunroof tool
I have trays that are slotted where the foam goes in the upper right hand corner instead of the upper left hand corner, I have trays that don't have a small compartment where the blue cloth should fold in to I have trays that provide for a plastic tipped wheel locating pin rather than the tommy bar and on and on.

After thinking about it, I have sold a bunch of these in this configuration over the years, never had an interesting question like yours come up and never had any negative feedback so I never gave it any thought. Maybe a very late car?
Last edited by bpoliakoff on Thu Apr 09, 2020 5:10 pm, edited 3 times in total.
81 Euro 635 M90 with motronic. Currently under a complete nut and bolt restoration. Pictures at
flickr.com/photos/bertsphotos.
knunger
Posts: 45
Joined: Wed May 24, 2017 4:42 pm
Location: Tucson AZ

Re: Complete tool kit

Post by knunger »

You'll have PM is a shake...
bpoliakoff
Platinum Member
Platinum Member
Posts: 3312
Joined: Thu Sep 28, 2006 9:28 pm
Location: scottsdale, arizona
Contact:

Re: Complete tool kit

Post by bpoliakoff »

SOLD
81 Euro 635 M90 with motronic. Currently under a complete nut and bolt restoration. Pictures at
flickr.com/photos/bertsphotos.
plip1953
Posts: 400
Joined: Mon Aug 13, 2018 4:15 pm
Location: Leeds

Re: Complete tool kit SOLD

Post by plip1953 »

That was quick!!

I'd be very interested to know exactly which model(s) this was standard in. My 1987 Highline has the foam insert on the left hand side and is consistent with part number 71111115329 in OEM.
Phil
__________________________

1988 Highline 635 CSi
ron
Platinum Member
Platinum Member
Posts: 4569
Joined: Sat Jul 10, 2004 11:35 am
Location: South Wales U.K.

Re: Complete tool kit SOLD

Post by ron »

The Highline kit should have a dedicated place with a raised centre spigot for the towing hook on the R/H side.
They are ALWAYS rustier than you thought!!!!!!
'85 M #228
'87 M #367
'88 High line.
'10 X5
‘84 Alfasud 1.5 ti
plip1953
Posts: 400
Joined: Mon Aug 13, 2018 4:15 pm
Location: Leeds

Re: Complete tool kit SOLD

Post by plip1953 »

I was sufficiently intrigued by the image of the for sale/sold toolkit to clear everything of my boot and check on mine. This is from an late Dec 87 build RHD 635 CSiA UK spec Highline. There's quite a difference!
Attachments
93140473_2457070377956815_8309586245340626944_n.jpg
93140473_2457070377956815_8309586245340626944_n.jpg (899.41 KiB) Viewed 8414 times
Phil
__________________________

1988 Highline 635 CSi
bpoliakoff
Platinum Member
Platinum Member
Posts: 3312
Joined: Thu Sep 28, 2006 9:28 pm
Location: scottsdale, arizona
Contact:

Re: Complete tool kit SOLD

Post by bpoliakoff »

The tray isn't the issue. The tools are. The tools will also go into the slotted tray. The tray shown is just a vehicle to display the tools. However there is no reason the other tray can not be used.There are 3-4 different configurations of trays I have. Yes Plip I agree with the tray you show. However your kit is incomplete. You are missing both the emergency window tool and the blue cloth. So these things should be added into the mix. One also has to remember. at least in the states, the cars did not come with the tools installed from the factory. They were put in at the dealer ship probably by a lot attendant /get ready boy and are what they grabbed. That is also why there is no true date on when they switched from red to green screwdrivers.
81 Euro 635 M90 with motronic. Currently under a complete nut and bolt restoration. Pictures at
flickr.com/photos/bertsphotos.
User avatar
PTFunk
Posts: 253
Joined: Wed Apr 04, 2012 10:22 pm
Location: Santa Barbara, CA

Re: Complete tool kit SOLD

Post by PTFunk »

bpoliakoff wrote: Sat Apr 11, 2020 7:34 pm ...However your kit is incomplete. You are missing both the emergency window tool and the blue cloth. So these things should be added into the mix.
Hi Bert - I'm not seeing the window tool in my set, nor does it show up in RealOEM for my car ('88 M6). Do you have the part number, or better yet a few spares to sell to us completists? :wink: Note that I do have the metal crank part with two 90-degree bends.

Also, do you have a source for repro cloths? There's a seller on eBay from South Africa that has them for $15 + $5 shipping, but I'm open to alternatives. EDIT: this eBay seller turned out to be a dud. I've left negative feedback in the Vendor Feedback section

Cheers,
Paul
Last edited by PTFunk on Fri Aug 28, 2020 7:44 pm, edited 1 time in total.
"Sabine": '88 M6 Royalblau/Silber
SLS delete, Wizard Cooling radiator, BavAuto Strut bar, M-Technik steering wheel, Conforti chip, Bilstein B8s / H&R Lowering Springs, BBE stainless cat-back exhaust
bpoliakoff
Platinum Member
Platinum Member
Posts: 3312
Joined: Thu Sep 28, 2006 9:28 pm
Location: scottsdale, arizona
Contact:

Re: Complete tool kit SOLD

Post by bpoliakoff »

For $15 grab them. I have been selling them for 5 year for $40. If he is that cheap I will buy some from him. Those plastic adapters are on Ebay for $50-$70
81 Euro 635 M90 with motronic. Currently under a complete nut and bolt restoration. Pictures at
flickr.com/photos/bertsphotos.
bpoliakoff
Platinum Member
Platinum Member
Posts: 3312
Joined: Thu Sep 28, 2006 9:28 pm
Location: scottsdale, arizona
Contact:

Re: Complete tool kit SOLD

Post by bpoliakoff »

For $15 grab them. I have been selling them for 5 years for $40. If he is that cheap I will buy some from him. Those plastic adapters are on Ebay for $50-$70 I am looking at Plips tool kit from his 87 and there is a place for one in his tray
81 Euro 635 M90 with motronic. Currently under a complete nut and bolt restoration. Pictures at
flickr.com/photos/bertsphotos.
plip1953
Posts: 400
Joined: Mon Aug 13, 2018 4:15 pm
Location: Leeds

Re: Complete tool kit SOLD

Post by plip1953 »

ron wrote: Thu Apr 09, 2020 6:07 pm The Highline kit should have a dedicated place with a raised centre spigot for the towing hook on the R/H side.
I've seen some images of trays with the raised centre spigot, but mine doesn't have it and I know the tray is 99.99% as originally supplied with the car (I've owned the car since 1992).

Does the number that's shown on my tray give any clues ie 1 117 105 0?

I have an OE blue cloth and the lack of the emergency window tool is correct (for my car) because I don't need one.
Phil
__________________________

1988 Highline 635 CSi
User avatar
86_6series
Platinum Member
Platinum Member
Posts: 1069
Joined: Mon Apr 02, 2007 10:08 pm
Location: West Nyack, NY

Re: Complete tool kit SOLD

Post by 86_6series »

plip1953 wrote: Sat Apr 11, 2020 2:24 pm I was sufficiently intrigued by the image of the for sale/sold toolkit to clear everything of my boot and check on mine. This is from an late Dec 87 build RHD 635 CSiA UK spec Highline. There's quite a difference!
Mine is exactly the same except the OEM cloth is in your tow hook compartment.
January 86 US CSi car
86-635CSi
96-MB C220 SOLD
98-740i
71-Continental MK3
bpoliakoff
Platinum Member
Platinum Member
Posts: 3312
Joined: Thu Sep 28, 2006 9:28 pm
Location: scottsdale, arizona
Contact:

Re: Complete tool kit SOLD

Post by bpoliakoff »

plip1953 wrote: Sun Apr 12, 2020 8:30 am
ron wrote: Thu Apr 09, 2020 6:07 pm The Highline kit should have a dedicated place with a raised centre spigot for the towing hook on the R/H side.
I've seen some images of trays with the raised centre spigot, but mine doesn't have it and I know the tray is 99.99% as originally supplied with the car (I've owned the car since 1992).

Does the number that's shown on my tray give any clues ie 1 117 105 0?

I have an OE blue cloth and the lack of the emergency window tool is correct (for my car) because I don't need one.
Understand but then why is there a place in your tray for it??
81 Euro 635 M90 with motronic. Currently under a complete nut and bolt restoration. Pictures at
flickr.com/photos/bertsphotos.
plip1953
Posts: 400
Joined: Mon Aug 13, 2018 4:15 pm
Location: Leeds

Re: Complete tool kit SOLD

Post by plip1953 »

bpoliakoff wrote: Mon Apr 13, 2020 12:55 am
plip1953 wrote: Sun Apr 12, 2020 8:30 am
ron wrote: Thu Apr 09, 2020 6:07 pm The Highline kit should have a dedicated place with a raised centre spigot for the towing hook on the R/H side.
I've seen some images of trays with the raised centre spigot, but mine doesn't have it and I know the tray is 99.99% as originally supplied with the car (I've owned the car since 1992).

Does the number that's shown on my tray give any clues ie 1 117 105 0?

I have an OE blue cloth and the lack of the emergency window tool is correct (for my car) because I don't need one.
Understand but then why is there a place in your tray for it??
I suppose I would turn the question round and ask why some cars need the window tool and others don't - was there a specific cutoff/changeover date? Maybe the decision was taken not to bother changing the tray shape to match not needing the tool? The lack of a raised spigot for the tow hook (on my tray) is another conundrum.

In similar vein, why would my car have been supplied with a 395mm TRX wheel for a spare? I've posted up that question in another thread, but suspect it was most likely simply what was to hand at that time and was adequate for the job, albeit not ideal. Another oddity in my view was that some early UK spec Highlines didn't have the full leather interior. Again, I can only presume that BMW either felt the need to use up an excess of older parts, or perhaps more likely, they didn't have a sufficient supply of the leather items when the changeover was made.
Phil
__________________________

1988 Highline 635 CSi
sauber
Posts: 36
Joined: Mon Dec 16, 2019 9:00 pm
Location: EU

Re: Complete tool kit SOLD

Post by sauber »

What part number does this part have?
93140473_2457070377956815_8309586245340626944_n.jpg
93140473_2457070377956815_8309586245340626944_n.jpg (1.69 MiB) Viewed 6766 times
bpoliakoff
Platinum Member
Platinum Member
Posts: 3312
Joined: Thu Sep 28, 2006 9:28 pm
Location: scottsdale, arizona
Contact:

Re: Complete tool kit SOLD

Post by bpoliakoff »

That kit was missing the unobtainium emergency window adapter tool Still have blue cloths. Have some with lighter logos as original. If 5 guys step up I will do $30 each shipped
rags2.jpg
rags2.jpg (587.5 KiB) Viewed 6760 times
81 Euro 635 M90 with motronic. Currently under a complete nut and bolt restoration. Pictures at
flickr.com/photos/bertsphotos.
scarab
Posts: 25
Joined: Sat May 23, 2020 11:29 pm
Location: US

Re: Complete tool kit SOLD

Post by scarab »

I would take one cloth with the logo as original.
Luke
'88 635CSi L6
bpoliakoff
Platinum Member
Platinum Member
Posts: 3312
Joined: Thu Sep 28, 2006 9:28 pm
Location: scottsdale, arizona
Contact:

Re: Complete tool kit SOLD

Post by bpoliakoff »

2 guys are in need 3 more
81 Euro 635 M90 with motronic. Currently under a complete nut and bolt restoration. Pictures at
flickr.com/photos/bertsphotos.
GRNSHRK
Platinum Member
Platinum Member
Posts: 3711
Joined: Thu Apr 08, 2004 3:24 pm
Location: Gilroy (SF Bay Area) CA

Re: Complete tool kit SOLD

Post by GRNSHRK »

Bert, why don't you just start a new thread, as many members probably won't look at this one, since the item, which is not the cloths, is noted as sold :-k

Just sayin' buddy \:D/
:mrgreen:
Bobbo
1980 633 CSi Cypress Green/Pearl Beige
2017 X5 M Sport Xdrive 35i Carbon Black/Ivory White
2005 330 Ci ZHP Cabrio Imola Red/Bone/Black
Image
Post Reply