suspension parts

Post in this forum for cars and/or parts for sale.

Moderators: GRNSHRK, ron, bfons

Post Reply
80euro Csi
Posts: 48
Joined: Wed Jul 18, 2012 9:31 pm
Location: Vancouver, WA

suspension parts

Post by 80euro Csi »

Bilstein B 6 fits 1980 euro 635, B 6 rears with original springs and front upper perches and used bearings.

$395.00 OBO --plus shipping USD
Attachments
2021-08-02 08.32.10 (3).jpg
2021-08-02 08.32.10 (3).jpg (1.66 MiB) Viewed 1785 times
Last edited by 80euro Csi on Sun Oct 17, 2021 3:04 pm, edited 4 times in total.
julianonline
Posts: 58
Joined: Mon Jan 19, 2015 9:38 pm
Location: Houston, TX

Re: suspension parts

Post by julianonline »

Hi, I have sent an email to you. Thanks!
julianonline
Posts: 58
Joined: Mon Jan 19, 2015 9:38 pm
Location: Houston, TX

Re: suspension parts

Post by julianonline »

Hello, what would be the shipping cost to Houston, TX, USA, ZIP code 77008 please?
80euro Csi
Posts: 48
Joined: Wed Jul 18, 2012 9:31 pm
Location: Vancouver, WA

Re: suspension parts

Post by 80euro Csi »

Hi again,
I'm really not in the business of selling parts so, give me a bit to weigh them and call UPS and I'll get back to you.
80euro Csi
80euro Csi
Posts: 48
Joined: Wed Jul 18, 2012 9:31 pm
Location: Vancouver, WA

Re: suspension parts

Post by 80euro Csi »

OK
UPS ground arrives Monday 27th
$104.87
That's fronts, rear with springs and upper perches with used bearings front.
FYI I really loved the ride but it was 1 and 1/4 " too high for what I wanted so I went with all new coil overs and that company wouldn't use my Bilsteins,they had agreement with others?

If you would email me I could send pics.
80euro Csi
80euro Csi
Posts: 48
Joined: Wed Jul 18, 2012 9:31 pm
Location: Vancouver, WA

Re: suspension parts

Post by 80euro Csi »

Picture of what I put on car, my car with 19" wheels and plenty of easy change adjustments
Attachments
2021-08-02 08.24.04.jpg
2021-08-02 08.24.04.jpg (121.96 KiB) Viewed 1783 times
2021-07-20 15.35.13 (2).jpg
2021-07-20 15.35.13 (2).jpg (313.08 KiB) Viewed 1783 times
80euro Csi
User avatar
635sharknose
Posts: 513
Joined: Fri Sep 13, 2019 4:58 pm
Location: The Netherlands
Contact:

Re: suspension parts

Post by 635sharknose »

The 19's look big on the slim E24 chassis in comparison to a modern car. Nowadays 19's are relatively small. The bigcoupe of the past is just a small car in present.
Paul
Image
Instagram: @635sharknose
1987 635CSi Bronzitbeige
User avatar
86_6series
Platinum Member
Platinum Member
Posts: 1069
Joined: Mon Apr 02, 2007 10:08 pm
Location: West Nyack, NY

Re: suspension parts

Post by 86_6series »

Can you post the link for the suspension company?

Thanks
86-635CSi
96-MB C220 SOLD
98-740i
71-Continental MK3
80euro Csi
Posts: 48
Joined: Wed Jul 18, 2012 9:31 pm
Location: Vancouver, WA

Re: suspension parts

Post by 80euro Csi »

https://groundcontrolstore.com/collections/bmw
Just be patient if you do buy from them and you'll need to do a little modifying on the front wheel wells.
It took me several attempts to finalize my spring choices for street and hard driving and added 15mm spacers on front only. Rears have plenty of room.
Attachments
2021-08-02 08.27.00.jpg
2021-08-02 08.27.00.jpg (55.65 KiB) Viewed 1757 times
80euro Csi
User avatar
Slownrusty
Posts: 617
Joined: Wed Apr 24, 2019 2:22 pm
Location: Houston, TX

Re: suspension parts

Post by Slownrusty »

Can you please elaborate on modifications are needed on the front to fit the Ground Control coilovers?

What is holding or supporting the threaded collar?
80euro Csi
Posts: 48
Joined: Wed Jul 18, 2012 9:31 pm
Location: Vancouver, WA

Re: suspension parts

Post by 80euro Csi »

I just wrote an entire explanation and it's gone?
So, because I'm running 19" wheels and 8.5 wide tires a slight dent is needed for clearance.
Regarding the support, you cut the spring perch and leave the weld or not and they supple O-rings and threaded collar for spring base.
They have must of this information on their website.https://groundcontrolstore.com/collections/bmw
I have to go now but would be happy to help later.
Neal
80euro Csi
Posts: 48
Joined: Wed Jul 18, 2012 9:31 pm
Location: Vancouver, WA

Re: suspension parts

Post by 80euro Csi »

inner fender well at firewall modification
inner fender well at firewall modification
2021-08-08 10.08.07.jpg (88.28 KiB) Viewed 1685 times
inside wheel well mounted
inside wheel well mounted
2021-08-08 10.08.44.jpg (59.49 KiB) Viewed 1685 times
I wasn't needed today, so I added these pics. If you want more info like spring size, length and poundage you can email me and I'll give you my phone number. It's much easier to convey the information
[email protected]
Post Reply