G'day
I'm trying to diagnose a no crank problem and wanted to look up the pins on the diagnostic connector to force a crank.
The VIN on my car says it is from 12/87 so I looked in the 88 ETM
And I found this diagram
But on my car the inner circle of connectors are clockwise in order
Connecting pin 11 to 14 does make the starter kick in as expected.
So, am I looking up the wrong ETM ? Or is the ETM not right ?
Many regards
Dave
Diagnostic Connector pins
Moderators: GRNSHRK, ron, bfons
Diagnostic Connector pins
'87 635
'84 323
'84 323