As part of my Brembo brake conversion I want to fit an E32 750i Brake master cylinder with a 25mm bore.
Question is will the standard 635CSi brake fluid reservoir fit onto this master cylinder.
If someone has done this conversion but used the 750i reservoir could they measure the distance between the reservoir mounting centres so I can check this against my 635 reservoir
Thanks
E32 750i Brake Master Cylinder
Moderators: GRNSHRK, ron, bfons
-
- Posts: 247
- Joined: Mon Aug 01, 2011 2:18 pm
- Location: Hampshire UK
-
- Posts: 247
- Joined: Mon Aug 01, 2011 2:18 pm
- Location: Hampshire UK
Re: E32 750i Brake Master Cylinder
That's great ...just as I thought , than you
Re: E32 750i Brake Master Cylinder
Is it a straight swap conversion for the e32 BMC into a RHD E24?
04/1986 635csi Euro spec
Australian Delivered, RHD
Australian Delivered, RHD