1984 633CSi (never ending)

Document your Sixer project here.

Moderators: GRNSHRK, ron, bfons

Post Reply
KINGJOHN808
Posts: 127
Joined: Sat Feb 16, 2019 2:27 am
Location: Ewa Kai

1984 633CSi (never ending)

Post by KINGJOHN808 »

Aloha. Here’s the latest on the “6”. Finally got around to installing the H&R Springs and B8’s. Wasn’t too bad but for sure would have been easier if it was on a lift.

What I definitely learned was be prepared to replace “A LOT” of the suspension especially if you are not clear when it was installed. I replaced both tie rods, lower control arms, sway bar bushings front and rear, dog bones

My struts were completely shot. I mean as soon as I removed the springs and top hats the struts literally collapsed onto them selves. I didn’t take as many pictures as I normally would have to attempt to document so can only show what I captured.

Next up is replacing all the calipers, new braided brake lines, new brake reservoir grommets, etc.
Attachments
C79E4695-4049-4A67-8481-466EE12DD9C5.jpeg
C79E4695-4049-4A67-8481-466EE12DD9C5.jpeg (22.67 KiB) Viewed 1522 times
0AEDB503-6F54-47BD-8656-DCDB735A5977.jpeg
0AEDB503-6F54-47BD-8656-DCDB735A5977.jpeg (31.33 KiB) Viewed 1522 times
1EBA1862-67A8-4EA5-860F-F80DEED747CF.jpeg
1EBA1862-67A8-4EA5-860F-F80DEED747CF.jpeg (19.9 KiB) Viewed 1522 times
0277AC43-C33B-4CE6-9B10-5FBC84C6C918.jpeg
0277AC43-C33B-4CE6-9B10-5FBC84C6C918.jpeg (31.52 KiB) Viewed 1522 times
Ewa Kai, Hawai’i
1984 633CSi
1983 633CSi (wreckers)

“Aloha and have a great day!”
Post Reply