Air conditionin function overview and retrofit/repair thread
Moderators: GRNSHRK, ron, bfons
Re: Air conditionin function overview and retrofit/repair thread
I have a quick update of interest to those of us retrofitting our AC systems. I just refilled my Saturn with some computer dusting spray made from 1-1, diflouroethane (HFC-152a). It is super cost effective, and almost as efficient as R134A.
The brand I bought is Ultra Duster. THE important thing is that it is made from diflouroethane.
You will also need a can sidetap to connect up to your manifold.
The brand I bought is Ultra Duster. THE important thing is that it is made from diflouroethane.
You will also need a can sidetap to connect up to your manifold.
1987 M6 - My dream car
Re: Air conditionin function overview and retrofit/repair thread
Reviving an older thread with a question about upgraded Air Con condenser sizes please.
Unfortunately I can't find any 16" High x 19" Wide PF condensers available in Australia.
(Please link me if you find any!)
The closest fitments I can find are:
16Hx18W - [RetroSpares.com.au]
17Hx19W - [RetroSpares.com.au]
My questions are:
* Will a 16" high condenser be a better fit than a 17", allowing for the upper & lower brackets?
* Will a 17" high condenser cause issues with upper/lower bracket fitment? i.e. Will it be too big?
Thanks in advance.
Unfortunately I can't find any 16" High x 19" Wide PF condensers available in Australia.
(Please link me if you find any!)
The closest fitments I can find are:
16Hx18W - [RetroSpares.com.au]
17Hx19W - [RetroSpares.com.au]
My questions are:
* Will a 16" high condenser be a better fit than a 17", allowing for the upper & lower brackets?
* Will a 17" high condenser cause issues with upper/lower bracket fitment? i.e. Will it be too big?
Thanks in advance.
04/1986 635csi Euro spec
Australian Delivered, RHD
Australian Delivered, RHD
Re: Air conditionin function overview and retrofit/repair thread
On my 86, that 17x19 would fit.
(That price, if it equates at all to USD, is crazy though!)
(That price, if it equates at all to USD, is crazy though!)
Re: Air conditionin function overview and retrofit/repair thread
Finally found one for a reasonable price, shipped to Australia!
Arrived today.
19x16" UAC 20015XC Universal Parallel Flow Condenser.
https://www.amazon.com.au/gp/product/B0100721JA
The Amazon product dimensions are wrong.
Actual dimension are:
490mm (19.2") bracket width, from one edge to the other.
500mm (19.68") overall width, from edge of bracket to pipe thread.
405mm (15.94") overall height, from top to bottom brackets edges.
Does not include any mounting bracket hardware other than what is fixed to the unit.
Another step closer to my A/C system rebuild :)
Arrived today.
19x16" UAC 20015XC Universal Parallel Flow Condenser.
https://www.amazon.com.au/gp/product/B0100721JA
The Amazon product dimensions are wrong.
Actual dimension are:
490mm (19.2") bracket width, from one edge to the other.
500mm (19.68") overall width, from edge of bracket to pipe thread.
405mm (15.94") overall height, from top to bottom brackets edges.
Does not include any mounting bracket hardware other than what is fixed to the unit.
Another step closer to my A/C system rebuild :)
04/1986 635csi Euro spec
Australian Delivered, RHD
Australian Delivered, RHD
Re: Air conditionin function overview and retrofit/repair thread
Hi,
I'm only starting to research my own car...Where did you get that full A/C diagram from? I'd be very interested in getting a link with ideally, all the part numbers corresponding to the numbers so I know what to order :)
Thanks!
I'm only starting to research my own car...Where did you get that full A/C diagram from? I'd be very interested in getting a link with ideally, all the part numbers corresponding to the numbers so I know what to order :)
Thanks!
Re: Air conditionin function overview and retrofit/repair thread
Been building up a new life in Southern California these past couple years, but looking to get back on the BigCoupe horse this summer. Figured I'd start posting again.
I recall I pulled the diagram from RealOEM.com. You can do all your parts lookups there.
https://www.realoem.com/
José
I recall I pulled the diagram from RealOEM.com. You can do all your parts lookups there.
https://www.realoem.com/
José
1987 M6 - My dream car
-
- Platinum Member
- Posts: 3710
- Joined: Thu Apr 08, 2004 3:24 pm
- Location: Gilroy (SF Bay Area) CA
Re: Air conditionin function overview and retrofit/repair thread
I was wondering where you've been
You'll have to change your location
You'll have to change your location
Bobbo
1980 633 CSi Cypress Green/Pearl Beige
2017 X5 M Sport Xdrive 35i Carbon Black/Ivory White
2005 330 Ci ZHP Cabrio Imola Red/Bone/Black
- hornhospital
- Platinum Member
- Posts: 2929
- Joined: Sun Jul 11, 2010 6:46 pm
- Location: Silverhill, AL
- Contact:
Re: Air conditionin function overview and retrofit/repair thread
Welcome back!
Ken Kanne
'84 633CSi "Sylvia"; '85 635CSi "Katja";'85 325e "Hazel Ann"; '95 M3 "Ashlyn"
'84 633CSi "Sylvia"; '85 635CSi "Katja";'85 325e "Hazel Ann"; '95 M3 "Ashlyn"
-
- Platinum Member
- Posts: 1224
- Joined: Fri Aug 14, 2015 10:04 am
- Location: Silicon Valley, CA
- Contact:
Re: Air conditionin function overview and retrofit/repair thread
Hey! It's been a minute. You used to be in the Napa region right? I hope your move wasn't wild fire related.Da_Hose wrote: ↑Sun Feb 05, 2023 6:27 pm Been building up a new life in Southern California these past couple years, but looking to get back on the BigCoupe horse this summer. Figured I'd start posting again.
I recall I pulled the diagram from RealOEM.com. You can do all your parts lookups there.
https://www.realoem.com/
José
Let me pile on and say it's good to hear from you again. It's good to get a part of the gang back.
-----
Song Huang
1984 633CSi
Last 7 of VIN: 6997383
Song Huang
1984 633CSi
Last 7 of VIN: 6997383
-
- Posts: 523
- Joined: Mon Oct 30, 2006 8:23 pm
- Location: San Mateo, CA just South of San Francisco
Re: Air conditionin function overview and retrofit/repair thread
Hey Jose, Welcome back. SoCal huh?Da_Hose wrote: ↑Sun Feb 05, 2023 6:27 pm Been building up a new life in Southern California these past couple years, but looking to get back on the BigCoupe horse this summer. Figured I'd start posting again.
I recall I pulled the diagram from RealOEM.com. You can do all your parts lookups there.
https://www.realoem.com/
José
hope all is well
Tommy
1989 635 CSI (Second owner since Jun 1995, driven daily and retired in 2013 with 295k to occasional driving)
2011 335D (Daily driver) with 103,550
1989 635 CSI (Second owner since Jun 1995, driven daily and retired in 2013 with 295k to occasional driving)
2011 335D (Daily driver) with 103,550
- Ralph in Socal
- Platinum Member
- Posts: 2746
- Joined: Tue Apr 14, 2009 3:32 am
- Location: High Desert of SoCal
Re: Air conditionin function overview and retrofit/repair thread
Da_Hose in SoCal. Too cool Jose.
Ralph
Ralph
There is a very fine line between "Hobby" and Mental Illness.
85 635csi Zinno Auto
84 528i Euro
83 635 Euro Arktik
81 528i Kastanien 5-speed
88 528e Bronzit (Granpa Car)
86 535i Auto (For Sale)
81 633 csi (retired)
85 635csi Zinno Auto
84 528i Euro
83 635 Euro Arktik
81 528i Kastanien 5-speed
88 528e Bronzit (Granpa Car)
86 535i Auto (For Sale)
81 633 csi (retired)