Conversion to ellipsoid headlights

Post in this forum for topics relating to the exterior. This includes body, windows, and accessories

Moderators: GRNSHRK, ron, bfons

Post Reply
User avatar
635sharknose
Posts: 513
Joined: Fri Sep 13, 2019 4:58 pm
Location: The Netherlands
Contact:

Conversion to ellipsoid headlights

Post by 635sharknose »

I am converting to ellipsoid headlights.
Now I noticed that the headlight hits a piece of metal frame.
Does anyone know how this is constructed in the later types (1988/1989) E24? There must be more space.
Attachments
20210124_120525.jpg
20210124_120525.jpg (293 KiB) Viewed 2470 times
20210124_120505.jpg
20210124_120505.jpg (271.15 KiB) Viewed 2470 times
Paul
Image
Instagram: @635sharknose
1987 635CSi Bronzitbeige
ron
Platinum Member
Platinum Member
Posts: 4569
Joined: Sat Jul 10, 2004 11:35 am
Location: South Wales U.K.

Re: Conversion to ellipsoid headlights

Post by ron »

Just cut the metal back to clear the light. Treat the cut edge. There is plenty of metal left.
They are ALWAYS rustier than you thought!!!!!!
'85 M #228
'87 M #367
'88 High line.
'10 X5
‘84 Alfasud 1.5 ti
User avatar
635sharknose
Posts: 513
Joined: Fri Sep 13, 2019 4:58 pm
Location: The Netherlands
Contact:

Re: Conversion to ellipsoid headlights

Post by 635sharknose »

Thanks, was thinking of doing that but then I changed my mind. I would like to make it as it is on the late models.
Paul
Image
Instagram: @635sharknose
1987 635CSi Bronzitbeige
Post Reply