Bosch wingcell clutch

Post here for mechanical and engine topics such as fuel issues, transmission problems, rough idle, exhaust, electrical issues, etc

Moderators: GRNSHRK, ron, bfons

Post Reply
tmoretta
Posts: 193
Joined: Mon Feb 06, 2017 8:30 pm
Location: Connecticut, U.S.A.

Bosch wingcell clutch

Post by tmoretta »

I am rebuilding the AC compressor on my '88 U.S. M6. I have the Bosch compressor removed. The 12 mm bolt is also removed from center of clutch assembly. How do I pry/remove the assembly?
User avatar
RossDinan6
Posts: 295
Joined: Mon Jan 29, 2007 2:35 am
Location: SW FL, USA

Re: Bosch wingcell clutch

Post by RossDinan6 »

Just guessing since I don't know, but is there a provision for a puller? Threaded holes, 2 or 3 on the face of the clutch?

Ross
Ross
'84 633 Dinan turbo
tmoretta
Posts: 193
Joined: Mon Feb 06, 2017 8:30 pm
Location: Connecticut, U.S.A.

Re: Bosch wingcell clutch

Post by tmoretta »

No, there are no threaded holes. I tried to use an old small puller with no luck.
Post Reply